<rp id="zni2f"></rp>
<th id="zni2f"></th>
<th id="zni2f"></th><tbody id="zni2f"><pre id="zni2f"></pre></tbody>

  • <th id="zni2f"><pre id="zni2f"></pre></th>

      1. 86-0763-3844318


        Location:Home - Products - All products
        Product name Grey Primer KE-D007 Product category Qi Ji series
        Detailed product

        Product introduction

        Multi-purpose nitrocellulose single group grey primer. To fill the marks or minor indentations left by the grinding of sandpaper,And provides simple isolation, is a kind of general economic type primer.

        Product characteristics


        Economy, can reduce cost.


        The paint film is exquisite, filling ability is good.


        Single unit, easy to construct.


        Fast drying and easy to polish.


        Physical parameters


        Appearance status

        Grey thick liquid


        Nonvolatile component






        specific gravity

        About 1.2±0.1kg/L



        5:1 Acetic acid butyl ester100±10S-4 cups,25℃)


        auxiliary product



        Universal thinner


        Construction parameters


        Mix proportion

        Gray primer                      volume   1


        Universal thinner      volume  11.5


        mix before use


        Spraying viscosity

        1822 seconds-4cups,25℃))


        Spraying tool

        Upper pot spray gun diameter of 1.41.6mm


        The lower pot nozzle diameter is 1.61.8mm


        Spraying pressure

        Gun pressure for 35kg/c


        Spraying method

        Spraying layer, each layer of evaporation time for 5 ~ 10 minutes (25 ),If the plastic parts are repaired, thin the first layer and give a longer evaporation


        Film thickness

        2030 micron


        drying time

        Can be polished30 minutes25℃),10 minutes60℃)


        Dry consolidation

        400#600# sandpaper to Dry grinding  or 800#1000#  sandpaper to water grinding


        Nonapplicable range

        Does not apply to stainless steel, aluminum, zinc, iron, wood and other surfaces



        1Recommended for local repair, not recommended for large area construction;


        2If high adhesion and strong corrosion resistance are to be obtained, it is recommended to apply a dual-component paint.


        3It is not recommended to use diluents with high moisture content and too fast drying.


        Packing specification






        The storage period of the open tank is 2 years




        WeChat QR code


        <rp id="zni2f"></rp>
        <th id="zni2f"></th>
        <th id="zni2f"></th><tbody id="zni2f"><pre id="zni2f"></pre></tbody>

      2. <th id="zni2f"><pre id="zni2f"></pre></th>